Honda TRX500FM Service Manual

REAR DRIVING MECHANISM
Inslallthe skid plate (11 with new bolts [21 and lighten
them to the specified torque.
TORQUE : 32 N'm (3 .3 kgf 'm , 24 IbHt)
Insta ll the rear axle (page 20-24).
REAR AXLE INSTALLATION
Apply molybdenum disul fi de grea se to the center
splines [11 of the axle (2J .
Inslall the axle into the final gear case from right side
until it is fully seated.
121
Coat a new O-ring 111 with grease and install it into the ~= ==::::: ===::;:=== === =~
20·24
groove in the left axle housing.
Install the side collar 12J onlo the rear ax le wIth the
tapered side facing inward.
Install the axle housing [11 into the gear case.
In stalli he four new nuts 121 and tighten the them to the
specified torque.
TORQUE : 47 N'm (4.8 kgf 'm , 35 IbHt)
111
121

Honda TRX500FM Specifications

General

Brand	Honda
Model	TRX500FM
Category	Offroad Vehicle
Language	English