LIGHTS/METERS/SWITCHES
BRAKEIT AILLIGHT
REPLACEMENT
Unhook the retaining strap and open the tool
box
lid.
Remove
the
two wire clips [1] and brakellaillighl wire
from the guides
of
the tool box lid
[2
].
Remove the
brake/taillight [3] from the tool box lid
by
releasing the bosses
(4)
from the
grommets
[5).
Disconnect the
3P connector [6] from the brake/taillight.
Be
careful not
to
Install a new brake/taillight in the reverse order
of
damage
the
seal
removal.
rubber.
COMBINATION METER
REMOVAUINSTALLATION
22-6
Remove the assist headlight
cover
(page 22-4).
Remove the
fuel tank breather
hose
[1) from the
meter
cover
[21.
Remove the
screw
(3).
Remove the
meter
cover from the
meIer
cover
slay.
Remove the three tapping screws [1].
Disconnect the
21P
connector [2] from the combination
meIer [3].
Inslallalion is
in
the reverse order of removal.
TORQUE
:
Combination meter mounting screw:
0.8 N'm (0.1 kgf'm, O.
6IbHt
)
III
131
121
To Next Page
Loading...
Need help?
General
