Honda TRX500FM Service Manual

ELECTRIC SHIFT PROGRAM (ESP: FE /FPE models)
VS SENSOR
REMOVAUINSTALLA TION
Remove the left side cover (page 2-4).
Disconnect the VS sensor 3P (Black) connector [1].
Remove the
bolt (2] and VS sensor [31 from the rear
crankcase cover.
J
p
L
Coal a new O-ring [1] with engine oil and install it onto ~:;:....::.=~= ;; _ r==i;: ;:;:====:;:';
the VS sensor [2] .
Install the VS sensor to the rear crankcase cover and
tighten the bolt securely.
Connec t the VS sensor 3P (Black) connector.
Install the left side cover (page 2-4),
SHIFT ANGLE SENSOR
INSPECTION
Remove the left mudguard (page 2-6),
Disconnecllhe shift angle sensor 3P (Gray) connector
111 .
SENSOR RESISTANCE
Measure the resistance at the shift angle sensor side
connecto r [21 terminals.
Connection : A - C
Sta n dard : 4 - 6 kO (20°CJ68°F)
Measure the resistance at the shift angle sensor side
connector 111 terminals varies while shifting Ihe gear
manually with the emergency gear change 1001 (page
23 - 6) .
Connection: A - 8
When
shifting up : R esis t ance Increase
When s hi fting down : Resistance decreases
23·27

Honda TRX500FM Specifications

General

Brand	Honda
Model	TRX500FM
Category	Offroad Vehicle
Language	English