MAINTENANCE
GUARDS
Check the outboard guard
[1
1. inboard guard (2), engine
guard
[31
and rear final gear skid plate
[41.
for cracks,
damage
or
looseness.
Tighten any loose fasteners. Replace the skid plates
or
guard as required .
CLUTCH SYSTEM
3-24
Remove Ihe left side cover (page 2-4).
Loosen the lock nut
[11
and turn the adjusting screw [2]
one
fuiliurn
clockwise.
Slowly
turn Ihe adjusting screw counterclockwise until
resistance is felt, then tum the adjusting screw 1/4 tum
clockwise.
Hold the adjusting screw and tighten the lock nul.
Start the engine and check for proper
dutch
operation.
Inslalithe
side cover (page 2-4)
To Next Page
Loading...
Need help?
General
