Honda TRX500FM Service Manual

FRONT WHEEUSUSPENSION/STEERING
INSPECTION
Remove the dust seals (1J from the knuckle [2] .
Turn the inner race of each bearing (3) in the knuckle
with your finger. The bearings should turn smoothly and
quietly. Also check that the bearing outer race fils tightly
in the hub or knuckle.
Inspect the knuckle for damage or cracks.
Inspect the
ball jOint boot [4] for tears or other damage
by moving the ball joint stud.
It should move freely and smoothly.
BRAKE DISC REPLACEMENT
Remove the four disc bolts [1] and brake disc \21 from
the
wheel hub [3]. $I
Do not get grease Inslall a new brake disc with new disc bolts and lighten
on the brake disc or them to the specified torque.
stopping power will
be reduced. TORQUE: 42 N'm (4.3 kgf 'm , 31 IbHt )
BEARING REPLACEMENT
Remove the inner dust seal [1) and Quter dust seal (2]
from the knuckle.
121
16-19

Honda TRX500FM Specifications

General

Brand	Honda
Model	TRX500FM
Category	Offroad Vehicle
Language	English