Honda TRX500FM Service Manual

Measure each follower bore 1.0 .
SERVICE LIMIT: 22.54 mm (0.887 In)
Subtract each follower 0 .0 . from the corresponding
bore 1.0. to obtain the follower-Io-bore clearance.
SERVICE LIMIT: 0.07 mm (0. 00 3 in)
CAMSHAFT INSTALLATION
Coverlhepiston Rotate the crankshaft to align the "r mark (IJ on the
with a shop lowe/or flywheel with t he index mark [2] on the crankcase coyer.
6qufllolent /0
protect it from
damage.
CYLINDER HEADNALVE
[2[
I
(1)
L
Lubricate the camshaft bearing and journal with engine ~ l = == =--==== = ========::;
oil.
Apply
molybdenum oil solution to the cam lobes.
.~
-
-
•
,
lubricate the cam chain [1) whole surface with engine ~ ==:::;:;;:=::;;;;;;;;;;;;;;; _ii;::; "iiiiiiiiiiiiiiii~
oil and install it on the cam sprocket.
Loosely
install the camshaft [2] into the crankcase.
10-23

Honda TRX500FM Specifications

General

Brand	Honda
Model	TRX500FM
Category	Offroad Vehicle
Language	English