CLUTCH/GEARSHIFT LINKAGE
Be
careful
no
llo
drop the lifter cam
plate.
12-24
Apply engine oil to the tips of the oil seal
111
.
Install
the
crankcase cover
121.
being careful not to
damage the oil seal lips.
Install
th
e fifteen bolts
(3]
and lighten them
in
a
crisscross pattern
in
several sleps.
Connecllhe
water hoses (lJ to the crankcase cover.
Inslallthe following:
- FElFPE models only: reduction gears and shift
control motor (page 23-31)
- fron t
propeller shaft (page 19-37)
- mudguards (page 2-6)
Adjust the
clutch system (page 3-24).
Fill
the
engine with recommended oil (page 3-13).
Fill and bleed the cooling system
(p
age
8--6).
Check the engine oil level (page 3-12).
To Next Page
Loading...
Need help?
General
