Icom ID-51A Advanced Instructions

9
D-STAR OPERATION <ADVANCED>
9-38
■ Repeater group name programming
Push [MENU] q .
Push D-pad( w ) to select the root item (“DV Memo-
ry”), and then push D-pad(Ent).
D-pad
(�)
(Ent)
Push D-pad( e ) to select “Repeater List,” and then
push D-pad(Ent).
Push D-pad( r ) to select the repeater group you want
to program the name.
Push [QUICK] t .
Push D-pad( y ) to select “Edit Name,” and then push
D-pad(Ent) to enter the group name edit mode.
Rotate [DIAL] to select a desired character. u
• Selectable input characters are Upper case letters, Low-
er case letters, Numbers or Symbols.
• The selected character blinks.
• Push D-pad() to move the cursor backward or forward.
• While selecting a character, push [QUICK]
to change
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
to open the
input mode selection window.
• A space can be entered in any input mode selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR]
to delete the selected character, or hold
down [CLR]
to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-7 for programming details.
Push D-pad( i ) to move the cursor to the second
digit.
Repeat steps o u and i to enter a name of up to 16
characters, including spaces.
!0 After entering, push D-pad(Ent) two times.
Character type
selection screen
Group name
edit mode
Example:
“China” is programmed.
Shows the currently se-
lected character type
Previous view

Icom ID-51A Specifications

General

Brand	Icom
Model	ID-51A
Category	Transceiver
Language	English