9
D-ST
AR OPERA
TION <AD
V
ANCED>
9-3
Message operation (Continued) ■
D Message Transmission
You can transmit a preprogrammed text message by
pushing [PTT]. First, select a TX message which also
turns ON the message transmission function.
Push [MENU] q .
Push D-pad( w ) to select the root item (“My Station”),
and then push D-pad(Ent).
Push D-pad( e ) to select “TX Message,” and then
push D-pad(Ent).
Push D-pad( r ) to select message memory number
1 to 5.
• To turn OFF the message transmission function, select
“OFF.”
t After selecting, push D-pad(Ent).
Push [MENU] y to exit the MENU screen.
• The message is transmitted along with your voice signal.
• The message is transmitted each time you push [PTT].
• The message is automatically transmitted every 30 sec-
onds during continuous transmission.
RX message display function
As the default, the received message is automatically
displayed and scrolled on the LCD.
To not display and scroll the received message, turn
OFF the RX message display function in “RX Mes-
sage” of the MENU screen. (p. 16-74)
(MENU > Display > RX Message)
The received mes-
sage is displayed
and scrolled here.
To Next Page
Loading...
Need help?
General
