Icom ID-51A Advanced Instructions

13-1
Section 13
SCAN OPERATION
Scan ■ .................................................................. 13-2
About the scan function D ................................. 13-2
VFO scan D ...................................................... 13-2
Memory scan D ................................................. 13-2
Memory bank scan D ........................................ 13-2
Scanning direction D ......................................... 13-3
Squelch setting for a scan D ............................. 13-3
Tuning step for a VFO scan D ........................... 13-3
Skip function D .................................................. 13-3
Temporarily Skip timer D ................................... 13-3
Receive mode for a scan D ............................... 13-3
When a signal is received D ............................. 13-4
Scan name D .................................................... 13-4
Scan Stop Beep function D ............................... 13-4
Scan function during Dualwatch operation D .... 13-4
VFO scan ■ .......................................................... 13-5
VFO mode scan D ............................................ 13-5
Setting and clearing the skip frequencies ■ .......... 13-7
Setting the skip frequencies D .......................... 13-7
Clearing the skip setting D ................................ 13-8
Memory scan ■ ..................................................... 13-9
Memory (skip) scan D ....................................... 13-9
Memory bank scan D ...................................... 13-10
Setting the skip channel ■ .................................. 13-12
Setting the temporary skip function ■ ................. 13-13
Previous view

Icom ID-51A Specifications

General

Brand	Icom
Model	ID-51A
Category	Transceiver
Language	English