9
D-ST
AR OPERA
TION <AD
V
ANCED>
9-5
When a DV call is received, the calling station and the
repeater’s call signs are stored in the RX HISTORY
screen.
Up to 50 calls can be stored.
Even if the transceiver is turned OFF, the RX record
won’t be deleted.
The stored call signs can be displayed in the following
manner.
D View in the RX History screen
Push [MENU] q .
Push D-pad( w ) to select the root item (“RX History”),
and then push D-pad(Ent).
Push D-pad( e ) to select an RX history number be-
tween “RX01” and “RX50.”
• In addition to the RX history number, the call signs of
the caller and called station, RX message, Repeater call
sign of the called station, received date and time are dis-
played on the LCD.
• If only one call is received, skip step e.
• “GW” appears when the gateway call is received.
• “GPS” appears when the received call includes GPS po-
sition.
• “UP” appears when the repeater uplink signal is re-
ceived.
Push D-pad(Ent) to show the contents of the RX his- r
tory.
Push D-pad( t ) to switch the displayed contents of
the RX history.
• CALLER : Shows the call sign of the caller station and
any note programmed after the call sign.
• CALLED : Shows the call sign of the called station.
• RXRPT1* : Shows the call sign of the repeater that was
accessed by the caller station. If it was a
call through a gateway and the internet, this
item displays the gateway repeater call sign
of your local area repeater.
• Rx RPT2* : Shows the call sign of the repeater you re-
ceived the call from.
• MESSAGE : Shows any message included in the re-
ceived call, if programmed.
• RX TIME : Shows the date and time the call was re-
ceived.
* “FREQUENCY” appears instead of these items when the
call was not through a repeater (Simplex call), to show the
frequency that was used.
Push [MENU] y to exit the MENU screen.
■ Received call sign viewing
When the received call includes the GPS
position data, it is displayed after RX TIME.
RX history
number
To Next Page
Loading...
Need help?
General
