12
MEMORY CHANNEL PROGRAMMING
12-3
■ Memory channel selection
The Memory mode is used for operation on memory
channels, which store programmed frequencies, call
signs and other data.
Push [M/CALL] q one or more times to select the
Memory mode.
• “ ” appears when the Memory mode is selected.
• Push [M/CALL]
again to select the Memory mode or
Weather channel mode*. The Memory mode, Call chan-
nel mode or Weather channel mode* are alternately se-
lected.
*Appears only for the U.S.A. version transceivers.
Rotate [DIAL] to select a desired memory channel. w
• Only programmed memory channels can be selected.
• See page 12-4 for memory programming details.
[DIAL]
■ Selecting a call channel
Call channels are used for quick recall of most often-
used operating settings.
Push [M/CALL] q one or more times to select the
Call channel mode.
• Push [M/CALL] again to select the Memory mode or
Weather channel mode*. The Memory mode, Call chan-
nel mode or Weather channel mode* are alternately se-
lected.
*Appears only in the U.S.A. version transceivers.
Rotate [DIAL] to select the Call channel between w
“C0” to “C3.”
[DIAL]
Appears
Rotate [DIAL] to select the
memory channel number
Rotate [DIAL] to select
To Next Page
Loading...
Need help?
General
