Icom ID-51A Advanced Instructions

9
D-STAR OPERATION <ADVANCED>
9-40
A Your (destination) call sign can be manually pro-
grammed.
The Your (destination) call sign is set to “TO,” you can
make a call to a station, even if you don’t know where
the station is currently located.
Up to 200 Your call signs can be programmed.
Push [MENU] q .
Push D-pad( w ) to select the root item (“DV Memo-
ry”), and then push D-pad(Ent).
D-pad
(�)
(Ent)
Push D-pad( e ) to select “Your Call Sign,” and then
push D-pad(Ent).
Push [QUICK] r .
Push D-pad( t ) to select “Add,” and then push D-
pad(Ent) to enter the edit mode.
Push D-pad( y ) to select “NAME,” and then push D-
pad(Ent).
Rotate [DIAL] to select a desired character. u
(For example: T)
• Selectable input characters are Upper case letters, Low-
er case letters, Numbers or Symbols.
• The selected character blinks.
• Push D-pad() to move the cursor backward or forward.
• While selecting a character, push [QUICK]
to change
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
to open the
input mode selection window.
• A space can be entered in any input mode selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR]
to delete the selected character, or hold
down [CLR]
to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-7 for programming details.
Push D-pad( i ) to move the cursor to the second
digit.
Repeat steps o u and i to enter a name of up to 16
characters, including spaces.
(For example: First, T, then O, then M.)
!0 After entering, push D-pad(Ent) two times.
■ Your (destination) call sign programming
☞ Continued on the next page
Example: Program “TOM/JM1ZLK” to the Your Call
Sign memory.
Select
( Select when you edit
the programmed Your
call sign.)
“TOM” is entered.
Previous view

Icom ID-51A Specifications

General

Brand	Icom
Model	ID-51A
Category	Transceiver
Language	English