8
D-STAR OPERATION <BASIC>
8-11
“TO” (Destination) setting (Continued) ■
D Using the “Your Call Sign”
The “Your Call Sign” memory stores the programmed
“UR” (destination) call sign.
When you select an individual station call sign for the
“TO” (Destination) setting using “Your Call Sign,” a gate-
way call can be made.
When you call the destination through a gateway, the
signal is automatically sent to the last repeater that the
station accessed.
So, even if you don't know where the station is, you can
make a call.
Hold down q for 1 second.
• The DR mode is selected.
Push D-pad( w ) to select “TO,” and then push D-
pad(Ent).
Push D-pad( e ) to select “Your Call Sign,” and then
push D-pad(Ent).
Push D-pad( r ) to select the destination, and then
push D-pad(Ent).
• Example: “TOM”
• “TOM” is displayed on “TO.”
After selecting a destination, you can select other
station preset in your transceiver by rotating [DIAL].
Example: Select “TOM” from the “Your Call Sign.”
NOTE: If the repeater, set to “FROM” (Access Re-
peater) has no Gateway call sign, you cannot make
a gateway call.
The call sign of
the selected sta-
tion is displayed.
Completed
Means this station
is programmed as
the 33th of the 33
stations on your
memory.
To Next Page
Loading...
Need help?
General
