Icom ID-51A Advanced Instructions

9
D-STAR OPERATION <ADVANCED>
9-8
■ EMR communication
The EMR (Enhanced Monitor Request) communication
mode can be used in only the DV mode. In the EMR
mode, no call sign setting is necessary.
All transceivers that receive an EMR mode signal auto-
matically open their squelch to receive the signal.
When an EMR mode signal is received, the audio (voice)
will be heard at the specified level, even if the volume
setting level is set to the minimum level, or digital call
sign/digital code squelch is in use. (Default: OFF)
NOTE: The EMR communication function is auto-
matically turned OFF when the transceiver is turned
OFF.
Hold down q for 1 second.
• The DR mode is selected.
Push D-pad( w ) to select “FROM,” and then push D-
pad(Ent).
D-pad
(�)
(Ent)
Push D-pad( e ) to select “Repeater List,” and then
push D-pad(Ent).
Push D-pad( r ) to select “11: Japan,” and then push
D-pad(Ent).
Push D-pad( t ) to select “Hamacho,” and then push
D-pad(Ent).
• “Hamacho” is displayed on “FROM”.
Push [MENU] y .
Push D-pad( u ) to select the root item (“DV Set”),
and then push D-pad(Ent).
Push D-pad( i ) to select “EMR,” and then push D-
pad(Ent).
Push D-pad( o ) to select “ON.”
!0 Push [MENU] to exit the MENU screen.
• “EMR” appears.
!1 Push [PTT] to transmit.
• The TX/RX indicator lights red.
• “EMR” blinks on a station that receives the EMR signal.
And the audio (voice) will be heard at the specified level,
or the [VOL] control level, whichever is higher.
!2 Release [PTT] to receive.
!3 To cancel the EMR mode, select “OFF” in step o, as
described above, or turn OFF the power.
Appears
Example: To transmit from the “Hamacho” repeater in
the EMR mode
Previous view

Icom ID-51A Specifications

General

Brand	Icom
Model	ID-51A
Category	Transceiver
Language	English