5
BASIC OPERATION
5-14
When “All” or “BC Radio Separate” is selected:
Rotate [VOL] to adjust the audio level. ➥
• The audio output levels for A band and B band are ad-
justed at the same time:
When “Separate” is selected:
Push [MAIN] q for 1 second to select A band or B
band for the MAIN band.
Rotate [VOL] to adjust the audio level. w
• When the audio output level for A band and B band are
independently adjusted.
For example, even if the audio output level for A band is
adjusted, B band’s audio level stays at the original level.
Dualwatch operation (Continued) ■
D Setting the volume for Dualwatch
The volume setting for Dualwatch can be set for both
bands simultaneously or for each band separately, in
the MENU screen.
Push [MENU] q to enter the Menu screen.
Push D-pad( w ) to select the root item (Sounds), and
then push D-pad(Ent) to go to the next level.
( MENU > Sounds > Volume Select)
Refer to the menu sequence shown directly above e
and push D-pad() to select, and then push D-
pad(Ent) to enter, one or more times until the last
screen is displayed.
Push D-pad( r ) to select the desired option.
• All : The audio output level for the BC
Radio, A band and B band are ad-
justed at the same time.
• BC Radio Separate : The audio output level for the BC
Radio is independently adjusted.
The audio output level for A band
and B band are adjusted at the
same time.
• Separate : The audio output level for the BC
Radio, A band and B band are in-
dependently adjusted.
Push [MENU] t to exit the Menu screen.
[VOL]
To Next Page
Loading...
Need help?
General
