Icom ID-51A Advanced Instructions

6
BC RADIO OPERATION
6-17
■ BC Radio setting
D FM Antenna
Select the desired antenna for FM radio.
Push [MENU] q .
Push D-pad( w ) to select the root item (“BC Radio”),
and then push D-pad(Ent) to go to the next screen.
D-pad
(�)
(Ent)
(MENU > BC Radio > BC Radio Set> FM Antenna)
Refer to the menu sequence shown directly above e
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
Push D-pad( r ) to select the desired antenna used
for the FM radio
• External : The external antenna is used.
• Earphone : The earphone antenna is used.
Push [MENU] t to exit the MENU screen.
D Power Save (BC Radio)
Set the power save function to reduce current drain and
conserve battery power when the BC Radio is ON.
Push [MENU] q .
Push D-pad( w ) to select the root item (“BC Radio”),
and then push D-pad(Ent) to go to the next screen.
D-pad
(�)
(Ent)
( MENU > BC Radio > BC Radio Set> Power Save
(BC Radio))
Refer to the menu sequence shown directly above e
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
Push D-pad( r ) to set the power save function when
the BC Radio is ON.
• OFF : The power save function is OFF.
• ON : When the BC Radio is ON, and when no sig-
nal is received for 5 seconds, this function
is activated in a 1:3 ratio (300 milliseconds:
900 milliseconds) during FM mode opera-
tion, or 1:1 ratio (2000 milliseconds: 2000
milliseconds) during AM mode operation.
Push [MENU] t to exit the MENU screen.
NOTE: This function is disabled when the external
power supply is used.
Previous view

Icom ID-51A Specifications

General

Brand	Icom
Model	ID-51A
Category	Transceiver
Language	English