6
BC RADIO OPERATION
6-3
When the transceiver receives 2 amateur bands on the
MAIN band and SUB band, you can still listen to the
BC Radio.
Push [QUICK] q .
Push D-pad( w ) to select “<<BC Radio ON>>,” and
then push D-pad(Ent).
• “ ” appears.
Push [CLR] e to turn OFF the BC Radio pop up
window.
• You can comfortably standby listening to the BC Radio.
NOTE: To show the BC Radio pop up window again,
push [QUICK] , and push D-pad() to select
“<<BC Radio>>,” then push D-pad(Ent).
D Mode selection
When the BC Radio pop up window is displayed, q
push [M/CALL] to select between the Tuning
mode and the Memory bank mode.
Rotate [DIAL] to select the frequency or memory w
channel.
• Tuning mode
The BC Radio Tuning mode is used to set the desired
BC Radio frequency.
To save the selected frequency, hold down [S.MW]
for 1 second to program into the lowest memory chan-
nel of the selected bank.
• Memory bank mode
The BC Radio Memory bank mode is very useful to
quickly select often-used frequency settings.
When the Memory bank mode is selected, “ ” and
the selected memory channel number appear.
NOTE: Push [QUICK] , and select “VFO” to se-
lect the Tuning mode, or select “MR” to select the
Memory bank mode.
Basic operation (Continued) ■
D Listening to the BC Radio while monitoring two ham bands
Appears
BC Radio pop
up window
BC Radio pop up
window is OFF
(BC Radio is ON)
Tuning mode
Memory bank mode
To show the BC Radio
pop up window again,
select “<<BC Radio>>.”
To Next Page
Loading...
Need help?
General
