10
GPS/GPS-A OPERATION
10-11
D GPS group name programming
You can program the name of each GPS group.
Push [MENU] q .
Push D-pad( w ) to select the root item (“GPS”), and
then push D-pad(Ent).
Push D-pad( e ) to select “GPS Memory,” and then
push D-pad(Ent).
Push D-pad( r ) to select the desired group to edit
its name.
Push [QUICK] t .
Push D-pad( y ) to select “Edit Name,” and then push
D-pad(Ent).
The group name editing screen appears. u
Rotate [DIAL] to select the first character. i
• Selectable input characters are Upper case letters, Low-
er case letters, Numbers or Symbols.
• The selected character blinks.
• Push D-pad() to move the cursor backward or forward.
• While selecting a character, push [QUICK]
to change
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
to open the
input mode selection window.
• A space can be entered in any input mode selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR]
to delete the selected character, or hold
down [CLR]
to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-7 for programming details.
Push D-pad( o ) to move the cursor to the second
digit.
!0 Repeat steps i and o to enter a group name of up
to 16 characters, including a space.
!1 After entering the name, push D-pad(Ent).
GPS MEMORY
screen
GPS memory operation ■ (Continued)
Select
Group name
editing screen
Character
type selection
screen
(Example)
When group name
is programmed as
“My Favorite.”
To Next Page
Loading...
Need help?
General
