16
MENU SCREEN
16-4
■ Menu items and Default settings
DUP/TONE...
Offset Freq
Repeater Tone
TSQL Freq
Tone Burst
DTCS Code
DTCS Polarity
Digital Code
0.000~0.600.00*~59.995
In this item, set the repeater duplex offset and the channel tone or code options.
67.0~88.5~254.1
67.0~88.5~254.1
RANGE OR VALUE (Default is shown in bold)
OFF or ON
023~754
Both N, TN-RR, TR-RN or Both R
00~99
DESCRIPTIONS
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
Sets the frequency offset for duplex (re-
peater) operation.
Selects the tone frequency used to ac-
cess the repeaters.
Selects the DTCS polarity for the DTCS
squelch or the pocket beep function.
Selects the digital code for the Digital
Code squelch function.
Selects the tone frequency for the Tone
squelch or the pocket beep function.
Turns the Tone Burst function ON or OFF.
When this setting is ON and you transmit
a signal which superimposes the CTCSS
tone or subaudible tone, the squelch tail
noise of FM mode is suppressed on the
RX side.
Selects DTCS (both encoder/decoder)
codes for DTCS squelch or the pocket
beep function.
In this item, set the scan options.
Scan
Pause Timer
Resume Timer
Program Skip
Bank Link
Program Link*
2sec~10sec~20sec or HOLD
0sec~2sec~5sec or HOLD
OFF or ON
A:□✔~Z:□✔
* See page 16-20 for details of the preset values.
RANGE OR VALUE (Default is shown in bold)
DESCRIPTIONS
Selects the scan pause time. When re-
ceiving signals, the scan pauses accord-
ing to the scan pause timer.
Selects the scan resume time from a pause
after the received signal disappears.
Turns the Program Skip Scan function ON
or OFF for a VFO mode scan.
Selects banks to be scanned during a
Bank Link Scan.
Sets the link function for the program scan
edge channels.
Temporary Skip Timer 5min, 10min or 15 min
Selects the Temporary Skip Time. When
the time is set, specified frequencies are
skipped for this period during a scan.
* The default value may differ, depending on the frequency band (selected as the Main band before
entering the Menu screen) and the transceiver version.
To Next Page
Loading...
Need help?
General
