Mitsubishi Electric CR750-Q User Manual

Appendix-696 Cooperative operation function
7Appendix
7.5.4 Sequence program
Use the PLC program to output the data of the robot No.1 current position to the shared memory.
(It is required to enable the extended function parameter IQMEM for robot No.1 and robot No.2.)
(Refer to "separate instruction manual: CR750-Q/CR751-Q series, CRnQ-700 series, iQ Platform Support-
ing Extended Function Instruction Manual for details.)

Mitsubishi Electric CR750-Q Specifications

General

Brand	Mitsubishi Electric
Model	CR750-Q
Category	Controller
Language	English