3Explanation of operation methods
Operating the program control screen 3-65
(4) Deleting a program (Delete)
1) Select the delete menu
Press the function key corresponding to the "DELETE" by program list display. Display the delete
screen. If the "DELETE" menu is not displayed, press and display the [FUNCTION] key
2) Specification of the program which delete.
In the parenthesis of the deleteing source, the program name beforehand selected by the program
list screen is displayed. (The figure the program name "1") If it changes, input the correct program
name.
Press the [EXE] key, and display the confirmation screen.
3) Delete the program
If the function key corresponding to "Yes" is pressed, it will delete the specification program and will
return to the program list display.
If it does not delete, press the function key corresponding to "No" It returns to the deletion screen.
<PROGRAM DELETE>　　 　
NAME ( 1 )
CLOSE
　 123
<FILE/EDIT>　 　1/ 20 Rem 136320
1　　　 　 08-04-24　17:20:32　 22490
2　　　 　 08-04-24　14:56:08　 694
A1　　 　 08-04-24　13:05:54　 2208
B1　　 　 08-04-24　13:05:54 　1851
RENAME
DELETE PRTCT
CLOSE
123 ⇒
<PROGRAM DELETE>
31
DELETE OK?
No
123Yes
<PROGRAM DELETE>　　 　
NAME ( 31 )
CLOSE
　 123
<FILE/EDIT>　 　1/ 20 Rem 136320
2　　　 　 08-04-24　14:56:08　 694
3　 　 　 08-04-24　13:05:54　 2208
4 　　 　 08-04-24　13:05:54 　1851
EDIT POSI.
NEW
COPY
123 ⇒
<PROGRAM DELETE>
31
DELETE OK?
No
123Yes
<PROGRAM DELETE>
31
DELETE OK?
No
123Yes
<FILE/EDIT>　 　1/ 20 Rem 136320
2　　　 　 08-04-24　14:56:08　 694
3　 　 　 08-04-24　13:05:54　 2208
4 　　 　 08-04-24　13:05:54 　1851
31 08-04-24 17:20:32 22490
EDIT POSI.
NEW
COPY
123 ⇒
The program name protected cannot be deleted.
The program name with which command protection is set up cannot be deleted. Please execute after
removing command protection.
To Next Page
Loading...
Need help?
General
