Mitsubishi MELSEC Q Series User Manual

A - 10
OPERATING PRECAUTIONS
This section explains precautions in the following order.
1) Precautions for system configuration
2) Precautions for standard ROM and CompactFlash card
3) Precautions for battery
4) Precautions for clock setting
5) Precautions for installation and uninstallation
6) Precautions for each utility
7) Precautions for programming
8) Precautions for program debugging
9) Precautions for use of FTP
(1) Compatible modules
In the system configuration where the C Controller module is used, some main and
extension base units ( Section 2.1.5) are inapplicable, and modules of some
function versions ( Section 2.2) are also not applicable.
(2) Multiple CPU system
(a) Applicable CPU modules
Refer to Section 12.2.1 for the CPU modules that can be used with the C
Controller module in multiple CPU systems.
(b) MT Developer connection in multiple CPU system (For Version 00Y or
earlier)
When a multiple CPU system includes the C Controller module as CPU No.1 and
the Motion CPU, the MT Developer's (Version 00Y or earlier) communication test
cannot be performed.(A Motion CPU communication test error (error
code:12288))will occur.
Perform either of the following for testing the MT Developer's communication.
• Use MT Developer Version 00Z or later.
• When using MT Developer Version 00Y or earlier, CPU No.1 must be a
programmable controller CPU in the multiple CPU system.
(3) Connection with GX Developer
Refer to Section 2.3 (6) for GX Developer connection.
Precautions for system configuration

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English