9 - 54
9.2 C Controller Setting Utility
9.2.11 Operating system menu
9
UTILITY OPERATION
9.2.11 Operating system menu
(1) System menu
Open and use the system menu of the C Controller setting utility by any of the
following three methods.
• Right-click on the title bar.
• Click the icon ( ) on the title bar.
• Press the [Alt] key and then the [ ] key.
Figure 9.48 System menu
Table9.30 Explanation of the system menu
Item Description
Reference
section
Move, Minimize, Close
Refer to the Microsoft Windows manual.
CC-Link utility
Starts the CC-Link utility.
During online connection, the connection target setting of the CC-Link
utility is the same as that of the C Controller setting utility.
9.3
MELSECNET/H utility
Starts the MELSECNET/H utility.
During online connection, the connection target setting of the
MELSECNET/H utility is the same as that of the C Controller setting utility.
9.4
Device monitor utility
Starts the Device monitor utility.
During online connection, the connection target setting of the Device
monitor utility is the same as that of the C Controller setting utility.
9.5
Version information Opens the "Version information" screen.
This section
(2)
To Next Page
Loading...
Need help?
General
