4
FUNCTIONS
4.11 Hardware Error Time CPU Operation Mode Setting
4 - 66
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
SETTING AND
PROCEDURES
6
I/O NUMBER
ASSIGNMENT
7
MEMORIES AND
FILES
8
INSTALLING /
UNINSTALLING
4.11 Hardware Error Time CPU Operation Mode Setting
(1) What is H/W error time CPU operation mode setting?
The H/W error time CPU operation mode setting is a setting by which, when a
hardware error occurs in the intelligent function module or interrupt module, whether
to stop or continue the output (Y) from the C Controller module and writing to buffer
memory is specified.
(2) H/W error time CPU operation mode setting
Make this setting in "I/O assignment" on the <<I/O assignment setting>> tab of the C
Controller setting utility.
1) Make the I/O assignment setting.
2) Click the button.
3) Select a desired setting option for the slot where the H/W error time CPU
operation mode is set. (The default is "Stop")
(3) Precautions
The H/W error time CPU operation mode setting becomes effective when:
• The C Controller system is powered on; or
• The C Controller module is reset.
Figure 4.50 Flow of H/W error time CPU operation mode setting
Detail setting
1) Make I/O assignment setting. 2) Select Detail setting. 3) Select "Stop" or "Continue" for H/W
error time CPU operation mode.
To Next Page
Loading...
Need help?
General
