Mitsubishi MELSEC Q Series User Manual

4
FUNCTIONS
4.16 Telnet Function
4 - 74
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
SETTING AND PROCEDURES
6
I/O NUMBER ASSIGNMENT
7
MEMORIES AND FILES
8
INSTALLING / UNINSTALLING
4.16 Telnet Function
Tin the C Controller module, the Shell command can be executed from the Telnet tool of
the development environment (personal computer) without using Tornado.
This allows simple remote debugging (task information display, memory dump, etc.) of the
C Controller module.
(1) Preparations for use of Telnet function
A login name and a password are required to use the Telnet function.
Before using the Telnet function, set the login name and password to the C Controller
module.
Setting the login user information (login name, password) restricts the users of the
Telnet function. ( Section 5.11)
(2) Applicable commands
The Telnet function allows use of the commands executable for Shell of Tornado.
Figure 4.56 Remote debugging using Telnet
Telnet
Development
environment
(personal computer)
Remote operation
by Telnet!
C Controller module

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English