9
UTILITY OPERATION
9.4 MELSECNET/H Utility
9.4.4 Operating Other station monitor screen
9 - 103
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
9.4.4 Operating Other station monitor screen
This screen displays the line status of the other stations (MELSECNET/H network
stations).
POINT
1. When the MELSECNET/H utility is started, monitoring is in a stop status. Click
the button to start monitoring.
2. If a communication error has occurred during connection, click the
button or make the connection target setting again.
3. Communications are not available during reset of the C Controller module.
Start communications after terminating the reset process.
(1) Other station monitor screen
(To next page)
Figure 9.79 Other station monitor screen
Table9.65 Explanation of Other station monitor screen
Item Description
Correspon-
ding SB
Correspon-
ding SW
Target module
Select the target MELSECNET/H module on the other station
to be monitored.
(Initial value: 1, Setting range: 1 to 4)
button
Starts monitoring of the MELSECNET/H module.
During monitoring, this button changes to , and
"*" flashes at top right of the button.
In an offline status, this button cannot be clicked.
Start monitor
Start monitor
Module information Online operation Parameter setting Target settingError history monitor
Other station monitor
Start monitor
Stop monitor
To Next Page
Loading...
Need help?
General
