Mitsubishi MELSEC Q Series User Manual

2
SYSTEM CONFIGURATION
2.4 Confirming Function Version and Software Version
2 - 21
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
SETTING AND PROCEDURES
6
I/O NUMBER ASSIGNMENT
7
MEMORIES AND FILES
8
INSTALLING / UNINSTALLING
2.4 Confirming Function Version and Software Version
Confirm the function version of the C Controller module and the software version of
SW PVC-CCPU by the following method.
(1) Confirming the function version of the C Controller module
(a) Checking "rating plate" on the module side face
The serial No. and function version of the module are shown at the SERIAL
section of the rating plate.
(b) Using the C Controller setting utility
Use either of the following:
• "System information" screen : Section 9.2.5
• [Version information] in "System menu" : Section 9.2.11
(2) Confirming the software version of SW PVC-CCPU
Select [Version information] in the "System menu" of the C Controller setting utility.
( Section 9.2.11)
POINT
The serial No. described on the rated plate may not match with the serial No.
displayed on the version information screen of C Controller setting utility.
• The serial No. on the rated plate describes the management information
of the product.
• The serial No. displayed on the version information screen of C Controller
setting utility describes the function information of the product.
The function information of the product is updated when adding functions.
Figure 2.10 Rating plate
Conformed standard
Function version
Serial No. (Upper 5 digits)

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English