9
UTILITY OPERATION
9.2 C Controller Setting Utility
9.2.2 Operating Module information screen
9 - 13
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
9.2.2 Operating Module information screen
The Module information screen displays the LED and switch statuses, error information,
and drive information of the C Controller module.
POINT
1. Monitoring is stopped when the <<Module information>> tab is switched to
another tab during monitor.
Monitoring resumes when the <<Module information>> tab is opened again.
2. If a communication error has occurred during connection, click the
button or make the connection target setting again.
3. Communication are not available during reset of the C Controller module.
Start communication after terminating the reset process.
Figure 9.18 Module information screen
Start monitor
To Next Page
Loading...
Need help?
General
