Mitsubishi MELSEC Q Series User Manual

13 - 13
13.3 I/O Number Assignment
13.3.2 I/O number of each CPU module
13
MULTIPLE CPU SYSTEM CONCEPT
13.3.2 I/O number of each CPU module
In the multiple CPU system, I/O numbers are assigned to each CPU module to specify
mounted CPU modules.
The I/O number for each CPU module is fixed to the mounted slot and cannot be changed
by <<I/O assignment setting>> of the C Controller setting utility.
Table13.5 shows the I/O number allocated to each CPU module when the multiple CPU
system is composed.íç2
The C Controller module uses the I/O numbers of the CPU modules for data
communications made by the CPU shared memories. ( Section 14.3)
Table13.5 I/O number for each CPU module
CPU module
mounting
position
CPU slot Slot 0 Slot 1
Slot 2
Note13.2
First I/O number 3E00H 3E10H 3E20H 3E30H
íç2
Note13.2
Basic
When the Basic model QCPU is used, available slot is limited up to Slot 1 (3E20H).
Note13.2
Basic

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English