Mitsubishi MELSEC Q Series User Manual

5
SETTINGS AND PROCEDURES BEFORE OPERATION
5.7 Battery Specifications, Installation and Replacement
5.7.5 Operation for storing C Controller without battery
5 - 41
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
SETTING AND PROCEDURES
6
I/O NUMBER ASSIGNMENT
7
MEMORIES AND FILES
8
INSTALLING / UNINSTALLING
5.7.5 Operation for storing C Controller without battery
When storing the C Controller module with the battery removed, be sure to perform
shutdown procedures before powering off the C Controller system and removing the
battery.
[Operation procedure]
1) Mount the C Controller module on the base unit, and switch the power on.
2) Perform the shutdown procedures (
Section 5.7.4 (2)), and power off the
C Controller system.
3) Remove the battery from the C Controller module.
IMPORTANT
Failure to follow the procedures given below may corrupt the data in the standard ROM/
battery-backed-up RAM being accessed, or may generate a file system error.

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English