Mitsubishi MELSEC Q Series User Manual

4 - 67
4.12 Intelligent Function Module and Interrupt Module Switch Settings
4
FUNCTIONS
4.12 Intelligent Function Module and Interrupt Module Switch
Settings
(1) Intelligent function module and interrupt module switch settings
The switch statuses of the Q series intelligent function modules and interrupt modules
can be set on the C Controller setting utility.
(2) Timing when the switch setting is written
The switch setting is written from the C Controller module to each intelligent function
module and/or interrupt module when the C Controller system is powered on or the C
Controller module is reset.
Figure 4.51 Writing switch setting to module
Development environment
(personal computer)
Intelligent function module switch setting on <<I/O assignment setting>> tab
1) Write
Written at power-on or when
C Controller module reset is
completed!
2)

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English