10
FUNCTIONS AND PROGRAMMING
10.2 Programming Using Bus Interface Functions
10.2.7 Program registration
10 - 26
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
10.2.7 Program registration
Register the files to the C Controller module by writing them to the standard ROM or
CompactFlash card of the C Controller module.
: Available, : Not Available
POINT
Before registering the files to the standard ROM or CompactFlash card, close all
running tasks in the C Controller module.
(1) Registration via FTP
The following explains the registration of the files to the C Controller module via FTP.
(a) Drives and operations allowed for FTP
The following indicates the drive names and operations allowed for registration via
FTP.
(b) Login user for use of FTP
The following indicates the login user data (user name, password) for use of FTP.
Refer to Section 5.11 for the addition or change of the login user, etc. other than
the above defaults.
Table10.4 How to write to each drive
Writing method
Program storage location
Standard
ROM
CompactFlash
card
Registration via FTP
Copy registration from CompactFlash card to standard ROM
Copy registration from development environment (personal
computer) to CompactFlash card
Table10.5 Drives available for FTP
Drive Drive name Operation
Standard ROM /ROM Write/read enabled
CompactFlash card /CF Write/read enabled
System drive /SYSTEMROM Only read enabled
Table10.6 Login user defaults
Item Value
User name
"target"
Password
"password"
To Next Page
Loading...
Need help?
General
