9
UTILITY OPERATION
9.4 MELSECNET/H Utility
9.4.2 Operating Module information screen
9 - 89
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
9.4.2 Operating Module information screen
The Module information screen displays various types of information of the MELSECNET/
H module (self station) that is controlled by the connected C Controller module.
POINT
1. If a communication error has occurred during connection, click the
button or make the connection target setting again.
2. Communications are not available during reset of the C Controller module.
Start communications after terminating the reset process.
(1) Module information screen
(To next page)
Figure 9.74 Module information screen
Table9.57 Explanation of Module information screen
Item Description
Correspon-
ding SB
Correspon-
ding SW
Link device refresh time
Displays the total link device refresh time taken to refresh data
with the MELSECNET/H module controlled by the C Controller
module (host CPU). (Unit: ms)
Max.
Displays the maximum total link device refresh time in the
past.
The symbol, "-" appears when Link device refresh cycle (
Section 9.4.6) is 0ms.
Min.
Displays the minimum total link device refresh time in the past.
The symbol, "-" appears when Link device refresh cycle (
Section 9.4.6) is 0ms.
Current
Displays the current total link device refresh time.
The symbol, "-" appears when Link device refresh cycle (
Section 9.4.6) is 0ms.
Start monitor
Module information
Error history monitor Online operationOther station monitor Parameter setting Target setting
To Next Page
Loading...
Need help?
General
