10
FUNCTIONS AND PROGRAMMING
10.2 Programming Using Bus Interface Functions
10.2.6 Precautions for program debugging
10 - 20
9
UTILITY OPERATION
10
FUNCTIONS AND
PROGRAMMING
11
OVERVIEW OF
MULTIPLE CPU
SYSTEM
12
MULTIPLE CPU
SYSTEM
CONFIGURATION
13
MULTIPLE CPU
SYSTEM
CONCEPT
14
COMMUNICATIONS
BETWEEN CPU
MODULES
15
PARAMETERS
ADDED FOR
MULTIPLE CPU
16
PRECAUTIONS FOR
USE OF AnS SERIES
MODULE
10.2.6 Precautions for program debugging
(1) VxWorks image file specification
To debug the user program, the same image file as that of VxWorks installed in the C
Controller module must be specified for Tornado.
(a) Specifying method
1) Make sure that the VxWorks image file in the system memory of the
development environment (personal computer) is matched with that of C
Controller module.
( This section (1)(b))
2) Start Tornado.
3) Select [Tools] [Target Server] [Configure] from the menu bar to open the
"Configure Target Severs" dialog box.
4) Select "Core File and Symbols" in the "Target Server Properties" pull-down
menu.
5) Select the "File" radio button, and specify the VxWorks image file storage
location in the text box.
Specify the following folder when SW PVC-CCPU has been installed into
"C:\MELSEC".
C:\Melsec\CCPU\Vx\Tools\vxWorks_XXXXX-Y( This section (1)(b))
The following screen provides an example of specifying the VxWorks image
file whose first five digits of serial No. are "06112" and whose function version
is "B".
Figure 10.6 VxWorks image file specification
4)
5)
To Next Page
Loading...
Need help?
General
