Mitsubishi MELSEC Q Series User Manual

9
UTILITY OPERATION
9.2 C Controller Setting Utility
9.2.4 Operating SRAM monitor screen
9 - 23
9
UTILITY OPERATION
10
FUNCTIONS AND PROGRAMMING
11
OVERVIEW OF MULTIPLE CPU SYSTEM
12
MULTIPLE CPU SYSTEM CONFIGURATION
13
MULTIPLE CPU SYSTEM CONCEPT
14
COMMUNICATIONS BETWEEN CPU MODULES
15
PARAMETERS ADDED FOR MULTIPLE CPU
16
PRECAUTIONS FOR USE OF AnS SERIES MODULE
(3) Data change dialog box
Data are entered into the battery-backed-up RAM.
(4) File format used when battery-backed-up RAM data are saved
The file format used when battery-backed-up RAM data are saved can be selected
from the CSV format or binary format.
Press the button on the SRAM monitor screen, and then select the file
format on the following screen.
Refer to the following for how to operate the "Save As" screen.
Section 9.1.6
Figure 9.25 Data change screen
Table9.12 Explanation of Data change screen
Item Description
Reference
section
Target address Displays the address of the target battery-backed-up RAM.
Input data Enter data to be entered into the battery-backed-up RAM.
button
Writes the data of "Input data" to the battery-backed-up RAM.
button
Closes the Data Change screen without writing the input data to the
battery-backed-up RAM.
Figure 9.26 Save As screen
Target address
Input data
OK
Cancel
Save data

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English