Mitsubishi MELSEC Q Series User Manual

2
SYSTEM CONFIGURATION
2.2 Applicable Modules
2.2.2 Precautions when using I/O modules or intelligent function modules
2 - 13
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
SETTING AND PROCEDURES
6
I/O NUMBER ASSIGNMENT
7
MEMORIES AND FILES
8
INSTALLING / UNINSTALLING
(f) Precautions for using FL-net module
Note that there are restrictions on the following functions of the FL-net module
controlled by the C Controller module.
• The word block read/write request messages of the message transmission
function cannot be received.
• The auto refresh function is not applicable.
(g) Precautions for interrupt processing
An interrupt feature is used for various communications of the C Controller
module.
Communication may be disabled if an interrupt disabled program is executed.
Also, communication may be delayed if a program with frequent interrupts is
executed.

Mitsubishi MELSEC Q Series Specifications

General

Series	MELSEC Q Series
Type	Modular PLC
Programming Software	GX Works2, GX Works3
Category	Programmable Logic Controller (PLC)
I/O Modules	Digital I/O, Analog I/O, High-Speed Counter, Positioning
Communication	Ethernet, CC-Link
Programming Languages	Ladder Logic, Structured Text, Function Block Diagram, Sequential Function Chart, Instruction List
Memory	Flash Memory
I/O Points	Up to 4096 points (expandable with additional modules)
Power Supply	AC or DC power supply options available, depending on the base unit and modules.
Mounting	DIN rail mounting
Operating Temperature	0°C to 55°C
Storage Temperature	-25°C to 75°C
Humidity	5% to 95% (non-condensing)
Vibration Resistance	10 to 57 Hz, 0.075mm amplitude
Weight	Varies depending on the module, from a few grams to several kilograms.
Shock Resistance	147 m/s² (3 times each in X, Y, Z directions)