Mitsubishi MELSEC Q Series User Manual

18
TROUBLESHOOTING
18.4 Error Code and Error Message Lists
18.4.2 Actions by Event No.
18 - 53
17
STARTING MULTIPLE CPU SYSTEM
18
TROUBLESHOOTING
APPENDICESINDEX
(2) Corrective actions for "MXwdkDrv" events by event Nos.
Corrective actions for events that may occur in "MXwdkDrv" are listed below by event
Nos.
(3) Corrective actions for "MUtllfQbf" events by event Nos.
Corrective actions for events that may occur in "MUtllfQbf" are listed below by event
Nos.
Table18.13 Corrective actions for "MXwdkDrv" events by event Nos.
Event No. Event Corrective action
0x40000000 The clock data of the C Controller module was set.
0xC0000001 An exception error occurred.
Reexamine the user program by checking the
event detail information (such as error details,
task names and program counters). Check
Tornado operation method as well.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
Table18.14 Corrective actions for "MUtllfQbf" events by event Nos.
Event No. Event Corrective action
0xC0000000 A packet illegal error occurred.
Check the port No. used and change it if
necessary.
Change the IP address.
0xC0000001 An instruction error occurred.
Check the utility and C Controller module
versions.
0xC0000002 A socket generation error occurred.
Restart the C Controller module.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
0xC0000003 A port acquisition error occurred.
Check the port No. used.
Check for overlap between the C Controller
module ports.
0xC0000004 A bind error occurred.
Restart the C Controller module.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English