EasyManuals Logo

Mitsubishi MELSEC Q Series User Manual

Mitsubishi MELSEC Q Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #617 background image
18
TROUBLESHOOTING
18.4 Error Code and Error Message Lists
18.4.2 Actions by Event No.
18 - 57
17
STARTING
MULTIPLE CPU
SYSTEM
18
TROUBLESHOOTING
APPENDICESINDEX
(9) Corrective actions for "MEtherDrv" events by event Nos.
Corrective actions for events that may occur in "MEtherDrv" are listed below by event
Nos.
(10)Corrective actions for "MRs232Drv" events by event Nos.
There are no events that occur in "MRs232Drv".
Table18.20 Corrective actions for "MEtherDrv" events by event Nos.
Event No. Event Corrective action
0xC0000200 An initialization parameter error occurred.
A system error in the C Controller module is
probable.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
0xC0000201 A resource shortage error occurred.
A system error in the C Controller module is
probable.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
0xC0000202 An END, MIB-ll structure initialization error occurred.
A system error in the C Controller module is
probable.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
0xC0000203 An interrupt registration error occurred.
A system error in the C Controller module is
probable.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
0xC0000210 An MII clock stop was detected.
A system error in the C Controller module is
probable.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.

Table of Contents

Other manuals for Mitsubishi MELSEC Q Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi MELSEC Q Series and is the answer not in the manual?

Mitsubishi MELSEC Q Series Specifications

General IconGeneral
SeriesMELSEC Q Series
TypeModular PLC
Programming SoftwareGX Works2, GX Works3
CategoryProgrammable Logic Controller (PLC)
I/O ModulesDigital I/O, Analog I/O, High-Speed Counter, Positioning
CommunicationEthernet, CC-Link
Programming LanguagesLadder Logic, Structured Text, Function Block Diagram, Sequential Function Chart, Instruction List
MemoryFlash Memory
I/O PointsUp to 4096 points (expandable with additional modules)
Power SupplyAC or DC power supply options available, depending on the base unit and modules.
MountingDIN rail mounting
Operating Temperature0°C to 55°C
Storage Temperature-25°C to 75°C
Humidity5% to 95% (non-condensing)
Vibration Resistance10 to 57 Hz, 0.075mm amplitude
WeightVaries depending on the module, from a few grams to several kilograms.
Shock Resistance147 m/s² (3 times each in X, Y, Z directions)

Related product manuals