To Next Page

To Previous Page

Maintaining Your Machine

If the exposure glass, exposure glass

cover, ADF belt, or ARDF belt is dirty,

copy clarity may be reduced. Clean

these parts if they are dirty.

❖

❖❖

❖ Cleaning the machine

Wipe the machine with a soft,

damp cloth. Then wipe it with a

dry cloth to remove the water.

Important

❒ Do not use chemical cleaner or or-

ganic solvents such as thinner or

benzene. If such substances get in-

side the machine or melt plastic

parts, a failure might occur.

❒ Do not clean parts other than those

explicitly specified in this manual.

Other parts should only be cleaned

by your service representative.

Cleaning the Exposure Glass

Cover

Cleaning the ADF or ARDF

ND1C0200

TRSR140E

KirC2_GBcopyF_FM.book Page 61 Tuesday, August 26, 2003 5:42 PM

Ricoh 2015 User Manual

Questions and Answers: