Specifying the Device Option
27
1
• ftp
ftp> put file1 duplex=on,binding=longedge
Binding
Specify the binding side for duplex printing.
Limitation
âť’ This function is available on Type 3 machines only. Check your machine type.
Note
âť’ Before specifying the binding option, the duplex option must be set to on.
âť’ Data and paper volume affect completion of the print job.
binding=value of binding
The following sample shows how to set duplex printing and long-edge binding
(host name: “nphost”; file name: “file1”):
• rsh
% rsh nphost print duplex=on,binding=longedge < file1
• rcp
% rcp file1 nphost:duplex=on,binding=longedge
• ftp
ftp> put file1 duplex=on,binding=longedge
Orientation
Specify the paper orientation.
Limitation
âť’ Only the selected PCL 5e from the printer language option is available.
orientation=feed direction (portrait or landscape)
The following sample shows how to print the paper vertically using the orienta-
tion function (host name: “nphost”; file name: “file1”):
• rsh
% rsh nphost print orientation=portrait < file1
Binding direction Value
Longedge longedge
Shortedge shortedge
Orientation value
Portrait portrait
Landscape landscape
To Next Page
Loading...
Need help?
General
