UNIX Configuration
26
1
Collating
Specify the number of collated sets.
qty=number of collated sets (1 to 999)
Limitation
âť’ This function is available only for PostScript 3 or PCL 5e.
❒ Do not specify “qty” and “copies” commands at the same time.
The following sample shows how to print 10 copies using the collate function
(host name: “nphost”; file name: “file1”):
• rsh
% rsh nphost print qty=10 < file1
• rcp
% rcp file1 nphost:qty=10
• ftp
ftp> put file1 qty=10
Duplex Printing
Specify whether to use duplex printing.
Limitation
âť’ This function is available on Type 3 machines only. Check your machine type.
Note
âť’ Before specifying the binding option, the duplex option must be set to on.
âť’ Data and paper volume affect the completion of the print job.
duplex=value of duplex printing
Reference
For more information about available paper size for duplex printing, see Gen-
eral Settings Guide.
The following sample shows how to set duplex printing (host name: “nphost”;
file name: “file1”):
• rsh
% rsh nphost print duplex=on,binding=longedge < file1
• rcp
% rcp file1 nphost:duplex=on,binding=longedge
Duplex printing Value
enable on
disable off
To Next Page
Loading...
Need help?
General
