Settings You Can Change with User Tools
33
3
âť–
âť–âť–
âť– Copier Auto Reset Timer
Specify the time to elapse before copier modes reset.
Note
âť’ If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
âť’ Default: On, 60 sec.
âť’ The time can be set from 10 to 999 seconds, using the number keys.
âť–
âť–âť–
âť– Facsimile Auto Reset Timer (facsimile)
Specify the time to elapse before the facsimile mode resets.
Note
âť’ Default: 30 sec.
âť’ The time can be set from 30 to 999 seconds, using the number keys.
âť–
âť–âť–
âť– Scanner Auto Reset Timer (scanner)
Specifies the time to elapse before the scanner function resets.
Note
âť’ If [Off] is selected, the machine will not automatically switch to the user
code entry screen.
âť’ Default: On, 60 sec.
âť’ The time can be set from 10 to 999 seconds, using the number keys.
âť–
âť–âť–
âť– Set Date
Set the date for the machine's internal clock using the number keys.
âť–
âť–âť–
âť– Set Time
Set the time for the machine's internal clock using the number keys.
Note
âť’ Enter the time using the number keys.
âť’ When the summer time function is set, you cannot make the time setting if
the current time falls on the transition time zone. Try to set the time again
after a while, or contact your service representative.
To Next Page
Loading...
Need help?
General
