Bit Switches - 2
SM 91 D418
Fax Option
Type 9001
D418
I-fax Switch 0F (SP No. 1-102-016)
No Function Comments
1: Encrypted
3-7 Not used
4.4.2 PRINTER SWITCHES
Printer Switch 00 (SP No. 1-103-001)
No Function Comments
0
Select page separation marks
0: Off
1: On
0: If a 2 page RX transmission is split, [*] is
printed in the bottom right corner of the 1st page
and only a [2] is printed in the upper right corner
of the 2nd page.
1: If a 2 page RX transmission is split into two
pages, for example, [*] [2] is printed in the bottom
right corner of the 1st page and only a [2] is
printed in the upper right corner of the 2nd page.
This helps the user to identify pages that
have been split because the size of the
paper is smaller than the size of the
document received. (When A5 is used to
print an A4 size document, for example.)
1
Repetition of data when the
received page is longer than
the printer paper
0: Off
1: On
1: Default. 10 mm of the trailing edge of the
previous page are repeated at the top of the next
page.
0: The next page continues from where the
previous page stopped without any repeated text.
2
Prints the date and time on
received fax messages
0: Disabled
This switch is only effective when user parameter
02 - bit 2 (printing the received date and time on
received fax messages) is enabled.
To Next Page
Loading...
Need help?
General
