Service Call Conditions
SM Appendix 3-53 D062/D063/D065/D066
Appendix:
Service Call
Conditions
Finisher staple trimming hopper full
790 B
The staple waste hopper is full of
cut staples.
If the hopper is full, empty the
hopper
If the hopper is not full, the hopper
full sensor is disconnected,
defective
SC800: Overall System
Energy save I/O subsystem error
816 D
The energy save I/O subsystem
is defective or this system
detects the controller board error.
Reboot the machine.
Replace the controller board.
Monitor Error
817 D
This is a file detection and
electronic file signature check
error when the boot loader
attempts to read the
self-diagnostic module,
system kernel, or root system
files from the OS Flash ROM,
or the items on the SD card in
the controller slot are false or
corrupted.
OS Flash ROM data defective;
change the controller firmware
SD card data defective; use another
SD card
Error Codes
Code Meaning
0x0000 0000 BIOS boot error
0x0000 0001 Primary boot start load error
To Next Page
Loading...
Need help?
General
