MFP Options
SM 2-107 D062/D063/D065/D066
Installation
2.20 MFP OPTIONS
2.20.1 MERGING APPLICATIONS ON ONE SD CARD
Overview
Two slots for boards and two slots for SD cards are provided on the controller box. Each
board or SC card must be inserted into its assigned slot. The slot assignment of each item
is listed in the table below.
If the customer wants to use more than one application on SD cards, applications
must be merged on the same SD card.
The data necessary for authentication is transferred with the application program
to the target SD card.
Do not use an SD card if it was used with a computer before this time. Correct
Rev. 08/03/2009
To Next Page
Loading...
Need help?
General
