Ricoh Aficio MP 8001 Service Manual

Bit Switches - 3
SM 99 D418
Fax Option
Type 9001
D418
4.5 BIT SWITCHES - 3
 Do not adjust a bit switch or use a setting that is described as "Not used", as this
may cause the machine to malfunction or to operate in a manner that is not
accepted by local regulations. Such bits are for use only in other areas, such as
Japan.
Default settings for bit switches are not listed in this manual. Refer to the System
Parameter List printed by the machine.
4.5.1 COMMUNICATION SWITCHES
Communication Switch 00 (SP No. 1-104-001)
No Function Comments
Compression modes available in receive
mode
Bit 1 Bit 0 Modes
0 0 MH only
0 1 MH/MR
1 0 MH/MR/MMR
0-1
1 1 MH/MR/MMR/JBIG
These bits determine the
compression capabilities to be
declared in phase B (handshaking)
of the T.30 protocol.
Compression modes available in transmit
mode
Bit 3 Bit 2 Modes
0 0 MH only
0 1 MH/MR
1 0 MH/MR/MMR
2-3
1 1 MH/MR/MMR/JBIG
These bits determine the
compression capabilities to be used
in the transmission and to be
declared in phase B (handshaking)
of the T.30 protocol.
4 Not used Do not change the settings.

Ricoh Aficio MP 8001 Specifications

General

Brand	Ricoh
Model	Aficio MP 8001
Category	All in One Printer
Language	English