User Tools
SM 5-18 D017/D018/D019/D020/D084/D085
5.4 USER TOOLS
The user program (UP) mode can be accessed by users and operators, and by sales and
service staff. UP mode is used to input the copier’s default settings. The user can reset the
default settings at any time. (See ‘System Setting and Copy Setting Reset’.)
5.4.1 UP MODE INITIAL SCREEN: USER TOOLS/COUNTER
DISPLAY
To enter the UP mode, press User Tools/Counter.
5.4.2 SYSTEM SETTINGS
In the User Tools/Counter display, press System Settings.
 Click a tab to display the settings.
To Next Page
Loading...
Need help?
General
