10 Rockwell Automation Publication 2198-UM001M-EN-P - November 2022
Preface
Additional Resources These documents contain additional information concerning related products
from Rockwell Automation.
Table 1 - Additional Resources
Resource Description
Kinetix Rotary Motion Specifications Technical Data, publication KNX-TD001
Product specifications for Kinetix VPL, VPC, VPF, VPH, and VPS; Kinetix MPL, MPM, MPF, and
MPS; Kinetix TLY and TL; Kinetix HPK; and Kinetix MMA rotary motors.
Kinetix Linear Motion Specifications Technical Data, publication KNX-TD002
Product specifications for Kinetix MPAS and MPMA linear stages, Kinetix MPAR and MPAI
electric cylinders, and Kinetix LDC and LDL linear motors.
Kinetix 5700, 5500, 5300, and 5100 Servo Drives Specifications Technical
Data, publication KNX-TD003
Provides product specifications for Kinetix Integrated Motion over the EtherNet/IP network
and EtherNet/IP networking servo drive families.
Kinetix Rotary and Linear Motion Cable Specifications Technical Data,
publication KNX-TD004
Product specifications for Kinetix 2090 motor and interface cables.
Kinetix Servo Drive Performance Specifications per Ecodesign Regulation
(EU) 2019/1781 Technical Data, publication KNX-TD006
Provides energy efficiency performance data for Rockwell Automation Kinetix Servo drives.
This data supports IE2 compliance of Kinetix Servo drives per EU 2019/1781.
Kinetix 5500 Servo Drive Fault Codes Reference Data, publication
2198-RD005
Provides the fault codes for Kinetix 5500 servo drives.
AC Line Filter Installation Instructions, publication 2198-IN003
Provides information on how to install AC line filters designed for Kinetix 5500 and
Kinetix 5700 servo drive systems.
Shunt Resistor Installation Instructions, publication 2097-IN002 Provides information on how to install and wire Bulletin 2097 shunt resistors.
System Design for Control of Electrical Noise Reference Manual,
publication GMC-RM001
Information, examples, and techniques that are designed to minimize system failures
caused by electrical noise.
Servo Drive Installation Best Practices Application Technique,
publication MOTION-AT004
Best practice examples to help reduce the number of potential noise or electromagnetic
interference (EMI) sources in your system and to make sure that the noise sensitive
components are not affected by the remaining noise.
Kinetix Motion Control Selection Guide, publication KNX-SG001
Overview of Kinetix servo drives, motors, actuators, and motion accessories that are
designed to help make initial decisions for the motion control products best suited for your
system requirements.
Kinetix 5500 Drive Systems Design Guide, publication KNX-RM009
System design guide to select the required (drive specific) drive module, power accessory,
feedback connector kit, and motor cable catalog numbers for your Kinetix 5500 drive
system.
Kinetix Halogen-free PUR and PVC Single Motor Cables Quick Reference,
publication 2090-QR002
Provides product specifications comparing 2090-CSBM1xx-xxLFxx (Halogen-free PUR) and
2090-CSxM1xx-xxVAxx (PVC) single motor cables.
Rockwell Automation Product Selection
website rok.auto/systemtools
Online product selection and system configuration tools, including AutoCAD (DXF) drawings.
Motion Analyzer System Sizing and Selection Tool
website https://motionanalyzer.rockwellautomation.com/
Comprehensive motion application sizing tool used for analysis, optimization, selection, and
validation of your Kinetix Motion Control system.
Vertical Load and Holding Brake Management Application Technique,
publication MOTION-AT003
Provides information on vertical loads and how the servo motor holding-brake option can be
used to help keep a load from falling.
Integrated Motion on the EtherNet/IP Network Reference Manual,
publication MOTION-RM003
Information on the AXIS_CIP_DRIVE attributes and the configuration software control modes
and methods.
Integrated Motion on the EtherNet/IP Network Configuration and Startup
User Manual, publication MOTION-UM003
Information on how to configure and troubleshoot your ControlLogix® and CompactLogix™
EtherNet/IPâ„¢ network modules.
GuardLogix 5570 Controllers User Manual, publication 1756-UM022
Provides information on how to install, configure, program, and use ControlLogix controllers
and GuardLogix® controllers in Studio 5000 Logix Designer® projects.
GuardLogix 5580 Controllers User Manual, publication 1756-UM543
Compact GuardLogix 5370 Controllers User Manual, publication 1769-UM022
Provides information on how to install, configure, program, and use CompactLogix and
Compact GuardLogix controllers.
Compact GuardLogix 5380 Controllers User Manual, publication 5069-UM001
GuardLogix 5570 and Compact GuardLogix 5370 Controller Systems Safety
Reference Manual, publication 1756-RM099
Provides information on how to achieve and maintain Safety Integrity Level (SIL) and
Performance Level (PL) safety application requirements for GuardLogix and Compact
GuardLogix controllers.
GuardLogix 5580 and Compact GuardLogix 5380 Controller Systems Safety
Reference Manual, publication 1756-RM012
ControlFLASH User Manual, publication 1756-UM105 Provides guidance on how to use ControlFLASHâ„¢ or ControlFLASH Plusâ„¢ software to update
drive firmware. See the release notes for your product to determine whether it supports
firmware updates by using ControlFLASH or ControlFLASH Plus software.
ControlFLASH Plus Quick Start Guide, publication CFP-QS001
EtherNet/IP Network Devices User Manual, ENET-UM006
Describes how to configure and use EtherNet/IP devices to communicate on the EtherNet/IP
network.
Ethernet Reference Manual, ENET-RM002 Describes basic Ethernet concepts, infrastructure components, and infrastructure features.
System Security Design Guidelines Reference Manual, SECURE-RM001
Provides guidance on how to conduct security assessments, implement Rockwell
Automation products in a secure system, harden the control system, manage user access,
and dispose of equipment.
Industrial Components Preventive Maintenance, Enclosures, and Contact
Ratings Specifications, publication IC-TD002
Provides a quick reference tool for Allen-Bradley® industrial automation controls and
assemblies.
To Next Page
Loading...
Need help?
General
