Rockwell Automation Allen-Bradley Kinetix 5500 User Manual

Rockwell Automation Publication 2198-UM001M-EN-P - November 2022 199
Appendix B Update the Drive Firmware
Verify the Firmware Update Follow these steps to verify that your firmware update was successful.
1. Open your RSLinx software.
2. From the Communications menu, choose RSWho.
3. Expand your Ethernet node, Logix backplane, and EtherNet/IP network
module.
4. Right-click the drive module and choose Device Properties.
The Device Properties dialog box appears.
5. Verify the new firmware revision level.
6. Click Close.
Verifying the firmware update is optional.

Rockwell Automation Allen-Bradley Kinetix 5500 Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley Kinetix 5500
Category	Servo Drives
Language	English